Exact Measurements Before Production Starts
One wrong measurement can cost more than your entire order. We visit your site and measure every dimension — by laser scan or by hand — before a single piece is made.
Why it matters
One wrong number.
Everything has to be remade.
Most sourcing problems don't start in the factory. They start with a number written down wrong.
Cabinet doors
Doors that hit the wall when opened
Wall width recorded 8cm short — cabinets were built to plan, not to reality.
Full cabinet remake + 4–6 week delay
Window frame
Frame that doesn't fit the opening
Aluminium window ordered 3cm too wide — the opening wasn't square.
Re-fabrication at full production cost
Floor tiles
Not enough tiles to finish the last row
Room diagonal wasn't measured — tile count was 7% off.
Emergency re-order, different dye lot, visible mismatch
These aren't edge cases. They happen on nearly every project where measurements are self-reported. We've seen all of them. That's why we do the measuring.
How we measure
Professional tools.
No guesswork.
We don't rely on blueprints or floor plans alone. We measure what's actually there — because walls are never perfectly straight, and drawings are rarely fully updated.
Laser measurement
Best forLarge spaces, high ceilings, complex layouts
ToolLaser distance meter (±1mm accuracy)
CapturesRoom dimensions, wall lengths, ceiling heights, diagonal cross-checks, openings
OutputDigital record, ready for factory input
Manual measurement
Best forCabinet recesses, stair risers, tile borders
ToolSteel tape, spirit level, angle gauge
CapturesRecess depths, step heights, irregular corners, plumbing and electrical positions
OutputDetailed sketch scanned and sent to you as PDF
On most projects we use both methods together — laser for the overall layout, manual for the fine details.
±1mm accuracy
Laser distance meter
The process
What happens,
step by step
01
Tell us about your project
Send your project details on WhatsApp or via our contact form: location, type of space, and which product categories you're planning to order.
02
We confirm and schedule
We confirm the visit schedule with you directly. You invite us — we handle the travel.
03
On-site measurement
Our engineer arrives with laser and manual tools. We measure every room, wall, opening, and fixture position relevant to your order. Key details are photographed.
04
Measurement report delivered
You receive a complete report: annotated floor plan, dimension table, and room-by-room notes. This goes directly to our production team when you're ready to order.
05
Production begins on verified dimensions
Production starts from our verified measurements — not from estimates. Every product is made to fit your actual space.
48 hrs
Report delivered after site visit
3–4 hrs
Typical villa measurement time
Deliverables
Your measurement report —
what's included
After the site visit, you receive a complete document you can use, share with your designer, or hand directly to our production team.
- Annotated floor plan with all key dimensions labelled
- Room-by-room dimension table (length, width, ceiling height, diagonals)
- Door and window schedule (each opening, size, swing direction)
- Product-specific measurement sheets (cabinets, tiles, flooring, etc.)
- Site photos with measurement annotations
- Engineer's notes on irregularities, obstacles, or on-site conditions
- Digital PDF delivered via WhatsApp or email
The report is yours. No order required.
Measurement Report · Villa Jakarta
PDF ready
Living
Kitchen
Bed 1
Bath
Bed 2
380 cm
240 cm
210 cm
| Room | Width | Length | Height |
|---|---|---|---|
| Living room | 376 cm | 480 cm | 280 cm |
| Kitchen | 320 cm | 380 cm | 280 cm |
| Master bedroom | 350 cm | 420 cm | 280 cm |
Coverage
We cover all six
product categories
Whether you're fitting out one room or an entire villa, our measurement covers every product we supply.
Doors & Windows
Opening width & height
Reveal depth
Frame clearance
Hinge side
Threshold
Kitchen Cabinets
Wall length
Ceiling height
Recess depth
Plumbing positions
Soffit height
Corner angles
Bathroom Cabinets
Wall width
Pipe positions
Floor-to-ceiling height
Mirror space
Drainage location
Stair & Handrail
Tread width & depth
Riser height
Total rise & run
Mounting positions
Landing dimensions
Floor & Wall Tile
Room perimeter
Diagonal check
Skirting height
Obstacle positions
Wet area boundaries
Wooden Flooring
Room sqm
Sub-floor condition
Expansion gaps
Doorway transitions
Underfloor heating
Service scope
We come to you —
by invitation
Our measurement service is not limited to Foshan. We travel to your project site when you invite us. The measurement is free — you cover travel costs for visits outside Guangdong Province.
You invite us
Send us your location and project details. We confirm availability and propose a visit date within 48 hours.
We handle travel arrangements
Our engineer books flights and accommodation. No coordination needed on your side — just confirm the site access.
We come prepared
Our engineer arrives with all tools ready. We measure, photograph, and document everything in one visit.
Can't arrange an on-site visit?
We provide a self-measurement guide with step-by-step instructions, templates, and a video walkthrough. Our team reviews your measurements and flags anything inconsistent before production starts.
Read the measurement guide
On-site measurement coverage
Southeast Asia & beyond · By invitation
Loading map…
Currently serving
Indonesia
Vietnam
Philippines
Malaysia
Thailand
Cambodia
Other locations available on request
Measurement is free. For visits outside Guangdong Province, you cover travel costs only.
4 cm
Difference found
on-site vs. drawings
on-site vs. drawings
~$2,800 saved
Client case
A real example:
4 cm that would have cost $3,000
A client in Singapore was renovating a 220 sqm villa. He sent us his architect's drawings and was ready to place a full cabinet and flooring order.
Before we started production, we arranged a site visit. Our engineer found that one kitchen wall — marked as 380 cm on the drawings — was actually 376 cm. The column at the corner was load-bearing and couldn't be modified.
We adjusted the cabinet layout before any material was cut. If we had built to the drawing, the corner unit would have needed to be scrapped and rebuilt entirely.
Estimated cost of that mistake: around $2,800 in materials and a five-week delay.
The client confirmed his full order that week. On installation day, everything fit.
FAQ
Common questions
Don't see your question here? Send us a message — we usually reply within a few hours.
Ask on WhatsAppYes. The on-site measurement is completely free. For visits outside Guangdong Province, you cover our travel costs — we charge nothing for the measurement itself or the report.
No. The report is yours regardless of whether you order with us. There is no obligation at any stage.
Yes, and many clients do. We review them carefully and flag any gaps before production starts. That said, measurements you take yourself are harder to verify — we always recommend an on-site visit for orders above $5,000.
A standard villa of 200–300 sqm takes approximately half a day (3–4 hours). Larger or more complex projects may require a full day.
Absolutely. The report is in PDF format and is designed to be shared. Many clients send it directly to their interior designers or local contractors.
Once you approve the report and confirm your order, production begins within 5 business days. Your measurements go straight into our production drawings — no re-entry or re-checking needed.
100% Free · No Obligation
Not Sure Where to Start?
Let's Talk.
Tell us about your project and we'll get back to you within 24 hours — no cost, no obligation.
Reply within 24 hours
No sales pressure
Free of charge